Double Glazed Window Repair
It's worth looking over the warranty that comes with most double-glazed windows. Generally, it includes any issues with the hardware of the window such as hinges and locking mechanisms - within the first 10 years.
A crack in the seal is typically the cause of mist between your glass windows. This issue must be addressed immediately to prevent damp or mould growing within your home.
Condensation Between the Windows
If condensation appears between your windows, it is an indication that the sealing in the gas insulating the windows has failed. This is a serious issue that should be addressed as soon as you can especially in winter when humidity is at its highest. It could also cause damage to sills and sealants, as well as mould.
Ideally double-glazed windows should not have condensation between the panes. This problem could be caused by extreme humidity or a cold snap. This problem is usually resolvable without having to replace the entire window. A professional can make tiny holes in the window and then spray a special cleaning solution inside. The water is then removed from the window and an anti-fogger device can be installed to stop further accumulation of moisture in the future.
Condensation can also occur between windows due to air leakage, or other factors outside the window. If this is the scenario, it's likely to take longer for moisture to gather in the window, as the air must be sufficiently warm for the water molecules to evaporate. In these cases it is recommended to replace the double-glazed windows rather than trying to repair the seals on the existing units.
A double-glazed window is constructed up of three or two pieces of insulated glass that are held together by a frame made of metal. The gap between the two windows is filled with an insulating gas like Krypton or argon and then sealed. The seal prevents the gas used to insulate from escaping and also preventing air and moisture from getting into the gap.
As windows age, seals can be damaged, allowing moisture to enter between the glass panes. It is important to know the signs of leaks in the seals because it indicates that the double glazing is no longer functioning as efficiently as it once was. This could lead to an increase in energy efficiency, higher heating bills, damage to property and the risk of condensation developing between the windows.
Mist
It is normal to observe condensation on your windows. This means that your double glazing system is operating correctly and is able to maintain heat in your house. The condensation occurs because the outside air is warmer than the glass, and reaches its dew point before the window does. Double glazing of top quality is an excellent method to get this.
If the condensation is on the side of your window, this could be an indication of a ventilation issue in your home. The excess moisture won't be absorbed and end up on the window, carpets furniture, and other parts of your home. The process of having this examined by an expert and ensuring that there plenty of fresh air flowing through your home will help avoid it in the future.
Another reason for mist to appear on double-glazed windows is that the seal between two panes of glass has broken. This could be due to wear and tear or chemical cleaning products being used. The most effective solution is to get the windows fixed in the shortest time possible.
A professional repair of your windows will ensure that they remain clear of fog free of condensation and free of misting. It's also cheaper than replacing the windows, and you will save money on your energy bills.
A FENSA-registered window installer can give you a quote to repair or replace your double glazed windows. If your existing windows are quite old and have been used for a long time you may want to consider upgrading them to new A-rated energy efficient ones.
It is a very good idea to keep copies of any warranties or agreements with your window fitters. It will be helpful if you experience any problems with your windows. Contact your window fitters to resolve the issue. This is a far better option than simply ignoring the problems that will only get worse and may lead to other issues within the home.
Close or open with difficulty
If double-glazed windows become difficult to open and close it's not just an inconvenience, it can lead to increased energy bills due to the loss of heat and draughts. It could also be a security problem especially if the locks aren't working correctly. It is essential to fix any issues with double glazed windows and doors immediately you discover them.
If you have tried to open your window using one of the easiest methods, such as using a screwdriver or tapping on the frame with a solid object, the issue may be more serious. It could be that the window has moved within its frame and requires to be set again or there is an opening between the glass panes as well as the frames. In either of these scenarios, you must contact a professional double glazing repair expert to ensure that the proper repairs are done and to prevent any further problems.
It's not unusual for UPVC window handles and lock mechanisms to become difficult to operate or get stuck, especially if they are old and worn. This is due to the accumulation of dirt or grease within the handle. This can be resolved by cleaning it with a uPVC cleaner. If this doesn't work, you can try tapping the uPVC with a screwdriver. Be careful not to scratch the handle or window handle mechanism.
If this doesn't solve the problem then the window will have to be replaced since the hinges might not be in the proper position or the locking mechanism may be damaged. In this case you should contact a specialist UPVC window repair expert.
David The Window Wizard specialises in all technical aspects of double glazed window and door repair including fixing a jammed or locked shut double glazing window. He has vast experience converting discontinued window mechanisms to modern ones. He often can save you the expense of replacing the entire window. For more information or to request an appointment for a free quote, contact us by phone or email today.
Warping
Double-glazed windows are the ideal way to cut down on energy in your home. They are composed of two panes that have a spacer, or dense gas in between them. This creates a seal which keeps cold air out and warm air inside. However with time, windows can be damaged or destroyed and require repair. Most of these repairs can be done without replacing the entire window.
Warping is a typical issue when double-glazed windows are installed. This happens when windows begin to bend, bow or twist, which could impact the structural integrity of the window as well as its insulating capabilities. Double-glazed windows should be properly installed and maintained to avoid this problem.
If your double-glazed windows are beginning to crack, it's crucial to get in touch with a specialist immediately to prevent the situation from worsening. They will be able to inspect your windows and determine the cause of the warping. They will employ special tools to fix your issue and ensure that your windows are fully sealed again.
A common cause of this issue is water vapour that is trapped between the upvc window seal windows, which can get accumulated over time. This could be due to a number of different factors, such as the weather, humidity and temperature changes. To address this issue, the specialist will drill a tiny hole to let out moisture. The specialist will use a cleaner on the glass to cleanse it, and then apply a sealant.
If windows aren't being shut or opened, it may be a sign of a broken mechanism or hinges. It is recommended to grease these parts of the window before calling in a professional, since this will often resolve the issue and lessen the necessity for replacements. If your windows are old or don't provide the insulation you desire it might be better to replace them.